| |
|
| |
|
|
|
| |
|
|
|
|
| |
 |
CBA-1000 Circuit Breaker Analyzer & Microhmmeter |
|
| |
|
• Circuit breaker timing test set; Up to 2 break per pole;
• Static and dynamic contact resistance measurement;
• Built in 200A Micrometer & Battery Operation;
• Motion and speed analyzer.
|
 |
| |
|
|
|
|
| |
|
CBA-2000 HV Circuit Breaker Analyzer & Microhmmeter |
|
|
|
| |
|
• Built in 200A microhmmeter;
• 12 Auxiliary timing input;
• Analysis & Result evaluation directly on the display;
• 18 main and 18 resistive contact input;
• Motion & Speed analyzer.
|
 |
| |
|
|
|
|
| |
|
T-3000 CT, PT, VT & Relay Testing |
|
|
|
| |
|
• Primary Injection testing capabilities;
• Generates up to 800A (Optional up to 4000A);
• 3000V AC Hipot Testing;
• Test result and settings are saved into local memory;
• Large graphical display.
|
 |
| |
|
|
|
|
|
|
| |
|
Auto-Ohm 100 S2, 10 to 100-AMP True DC Micro-Ohmmeter |
|
|
|
| |
|
• 10 to 100 Amperes true continuous DC current
• Automatic control of current rise and fall times
• Digital resistance readings from 1 micro-ohm to 300 milli-ohms
• Stores and can display last 3 readings
• Weighs less than 21 lbs (9.5 Kg)
|
 |
| |
|
|
|
|
| |
|
Auto-Ohm 200 S2, 10 to 100-AMP True DC Micro-Ohmmeter |
|
|
|
| |
|
• 10 to 200 Amperes true continuous DC current
• Automatic control of current rise and fall times
• Digital resistance reading from 1 micro-ohm to 300 milli-ohm
• Stores and can display last 3 readings
• Weighs less than 25 lbs (11.4 Kg)
|
|
| |
|
|
|
|
| |
|
DMOM-100 S2 , 10 to 100-AMP True DC Micro-Ohmmeter With Built-in Printer |
|
|
|
| |
|
• Automatic control of current rise and fall times
• Digital resistance reading from 1 micro-ohm to 300 milli-ohms
• Stores 6,000 readings
• 2.5-inch wide built-in thermal printer
• Weighs less than 21 lbs (9.5 Kg)
|
 |
| |
|
|
|
|
| |
|
DMOM-200 S2 , 10 to 200-AMP True DC Micro-Ohmmeter With Built-in Printer |
|
|
|
| |
|
• Automatic control of current rise and fall times
• Digital resistance reading from 1 micro-ohm to 300 milli-ohms
• Stores 6,000 readings
• 2.5-inch wide built-in thermal printer
• Weighs less than 25 lbs (14.5 Kg)
|  |
| |
|
|
|
|
|
|
|
|
| |
|
MCCB-250 , 250 AMP Molded Case Circuit Breaker Tester |
|
|
|
| |
|
• 250 Ampere current source
• 16.8”W x 12.6”H x 10.6”D (42.6 cm x 32.0 cm x 27.0 cm); Weight: 46 lbs (21 kg)
• 100 – 120 Vac or 200 – 240 Vac (factory pre-set), 50/60 Hz
• 0 – 5 A @ 120 Vac max; 0 – 25 A @ 24 Vac max; 0 – 120 A @ 6 Vac max; 0 – 250 A @ 3 Vac max
• 100 mA – 1000 A; Accuracy: 1% of reading ±20mA
• Isolated CT
• 10 mA – 10 A; Accuracy: 1% of reading, ±2mA
• Isolated CT
• 1ms – 2 hours; Accuracy: 0.1% of reading ±1ms
• Voltage input (24V – 300V, DC or peak AC), dry contact input, or removal of primary current
• Back-lit LCD Screen (20 characters by 4 lines); viewable in bright sunlight and low-light levels
• RS-232C port for factory calibration and diagnostics
• Designed to meet IEC61010 (1995), UL61010A-1, CSA-C22.2 standards
• Operating: -10°C to 50° C (15°F to +122° F); Storage: -30° C to 70° C (-22°F to +158° F)
• Power cord, ground cable, 10-foot #2 AWG test leads
• Transportation case
• One year on parts and labor
|
 |
| |
|
|
|
|
| |
|
CT-3500 , 3-Channel Time/Cycle Timer with Built-in Printer |
|
|
|
| |
|
• Displays timing results in milli-seconds and cycles
• Timing results from all three timers are displayed simultaneously
• Back-lit LCD screen is viewable in both bright sunlight or low-light conditions
• Fully analyzes all breaker operations (Open, Close, Open – Close, Close – Open )
• Built-in 2.5-inch wide thermal printer
• Stores 128 timing records
|  |
| |
|
|
|
|
| |
|
DigiTMR , Circuit Breaker Analyzer with 3 Contact inputs |
|
|
|
| |
|
• Circuit-breaker analyzer
• 18”W x 7”H x 15”D (45.7 cm x 17.8 cm x 38.1 cm); Weight: less than 19 lbs (8.6 kg)
• 3 Amps, 100 – 120 Vac or 200 – 240 Vac (factory pre-set), 50/60 Hz
• 3 dry-input channels; each channel detects main and insertion-resistor contacts
• 1-second, 10-seconds, or 20-seconds
• ±100 micro-seconds @ 1-second duration, ±1.00 milli-seconds @ 10-second duration, ±2.00 & milli-seconds @ 20-second duration
• 0.05% of reading ±0.1 ms @ 1-second duration
• Fuses protect all isolated power supplies; all contact inputs are grounded until test; input
• channels are protected against static discharge
• Closed: less than 20 ohms; Open: greater than 5,000 ohms
• 50 – 5,000 ohms
• Open/Close: 30 – 300V, DC or peak AC
• V1: analog input; 0 – 255V, DC or peak AC; Sensitivity: ±1V; V2: voltage presence/absence
detector input; 30 – 300V, DC or peak AC
• Initiate Open, Close, Open – Close, Close – Open, Open – Close – Open
• 30A, 250 Vac/dc max
• One, non-contact, Hall-effect sensor, 0 – 20 amp range, dc to 5Khz
• 1 digital travel transducer channel; Linear range: 0.0 – 60.0 in (±0.005 in.); Rotary range: 0 –
• 360 degrees (±0.006 degrees)
• Measures “slow-close” contact-point distances; results can be printed
• Back-lit LCD Screen (20 characters by 4 lines); viewable in bright sunlight and low-light levels
• Built-in 4.5-inch wide thermal printer can print both graphic contact travel waveforms and tabulated test results
• Stores up to 100 test records and 99 breaker test plans
• RS-232C port (19,200 baud)
• Windows® XP/Vista-based Breaker-Analysis software is included with purchase price
• Designed to meet UL 61010A-1 and CAN/CSA C22.2 No. 1010.1-92 standards
• Operating: -10°C to 50° C (15°F to +122° F); Storage: -30° C to 70° C (-22°F to +158° F)
• Transportation case (available for the DigiTMR and the travel transducers)
• One year on parts and labor
 |
|
|
 |
| |
|
|
|
|
| |
|
CT-6500 S2, Circuit Breaker Analyzer with 3, 6, or 12 Contact inputs |
|
|
|
| |
|
• Prints breaker analysis results in both tabular and graphic formats
• Built-in 4.5-inch wide thermal printer
• Initiate breaker operation
• Digital travel transducer requires no setup or calibration
• Detects main contact and insertion-resistor contact on the same input channel
• Stores up to 200 test records
• RS-232C and USB computer interfaces
• Diagnostic capabilities
|
 |
| |
|
|
|
|
| |
|
CT-7000 S2 , Circuit Breaker Analyzer with 3, 6, or 12 Contact inputs Exrensive Storage |
|
|
|
| |
|
• Prints breaker analysis results in both tabular and graphic formats
• Built-in 4.5-inch wide thermal printer
• Initiate breaker operation
• Digital travel transducer requires no setup or calibration
• Detects main contact and insertion-resistor contact on the same input channel
• Stores up to 150 test records and 99 test plans
• RS-232C and USB computer interfaces
• Supports resistor type transducer
|
 |
| |
|
|
|
|
| |
|
CT-7500 S2 , Circuit Breaker Analyzer with 3, 6, or 12 Contact inputs, First Trip Capability |
|
|
|
| |
|
• Prints breaker analysis results in both tabular and graphic formats
• Built-in 4.5-inch wide thermal printer
• Initiate breaker operation
• Digital travel transducer requires no setup or calibration
• Detects main contact and insertion-resistor contact on the same input channel
• Stores up to 150 test records and 99 test plans
• RS-232C and USB computer interfaces
• Supports resistor type transducer
|
|
| |
|
|
|
| |
|
RMO60E , Protective Earth Resistance Meter |
|
|
|
| |
|
• Lightweight - only 7,5kg
• Powerful 10A - 60A DC
• Measuring range 100µO - 999,9mO
• Resolution to 0,1µO
• SINGLE / CONT Mode
• Mechanical protection IP54
|
 |
| |
|
|
|
|
| |
|
|
|
| |
|
RMO100 , Micro OhmMeter |
|
|
|
| |
|
• Lightweight - only 7kg
• Powerful 5A - 100A DC
• Measuring range 0 – 999,9mΩ
• Resolution to 0,1μΩ
• SINGLE / CONT Mode
• Mechanical protection IP54
|
 |
| |
|
|
|
| |
|
|
|
| |
|
RMO200 , Micro OhmMeter |
|
|
|
| |
|
• Lightweight - only 7kg
• Powerful 5A - 200A DC
• Measuring range 0 – 999,9mΩ
• Resolution to 0,1μΩ
• SINGLE / CONT Mode
• Mechanical protection IP54
|
 |
| |
|
|
|
| |
|
|
|
| |
|
RMO300 , Micro OhmMeter |
|
|
|
| |
|
• Lightweight - only 7,5kg
• Powerful 5A - 300A DC
• Measuring range 0 – 999,9mΩ
• Resolution to 0,1μΩ
• SINGLE / CONT Mode
• Mechanical protection IP54
|
 |
| |
|
|
|
| |
|
|
|
| |
|
RMO400 , Micro OhmMeter |
|
|
|
| |
|
• Lightweight - only 7,5kg
• Powerful 5A - 400A DC
• Measuring range 0 – 999,9mΩ
• Resolution to 0,1μΩ
• SINGLE / CONT Mode
• Mechanical protection IP54
|
 |
| |
|
|
|
| |
|
|
|
| |
|
RMO500 , Micro OhmMeter |
|
|
|
| |
|
• Lightweight - only 8kg
• Powerful 5A - 500A DC
• Measuring range 0 – 999,9mΩ
• Resolution to 0,1μΩ
• SINGLE / CONT Mode
• Mechanical protection IP54
|
 |
| |
|
|
|
| |
|
|
|
| |
|
RMO600 , Micro OhmMeter |
|
|
|
| |
|
• Lightweight - only 8kg
• Powerful 5A - 600A DC
• Measuring range 0 – 999,9mΩ
• Resolution to 0,1μΩ
• SINGLE / CONT Mode
• Mechanical protection IP54
|
 |
| |
|
|
|
| |
|
|
|
| |
|
POB30AD , Power Box |
|
|
|
| |
|
• Lightweight - only 9kg
• Powerful – up to 35A
• Voltage 10V to 300V DC
• Voltage 10V to 250V AC
• Output protection
• Fully automatic operation
|
 |
| |
|
|
|
| |
|
|
|
| |
|
POB30ADL , Coil Tester & Breaker Supply |
|
|
|
| |
|
• Lightweight - only 9 kg
• Powerful – up to 30 A
• Voltage 1 V to 50 V DC
• Voltage 1 V to 40 V AC
• Output protection
• Fully automatic operation
|
 |
| |
|
|
|
| |
|
|
|
| |
|
POB30D , Power Box |
|
|
|
| |
|
• Lightweight - only 8kg
• Powerful – up to 35A
• Voltage 10V to 300V DC
• Ripple free DC-voltage
• Output protection
• Fully automatic operation
|
 |
| |
|
|
|
| |
|
|
|
| |
|
POB30DL , Coil Tester & Breaker Supply |
|
|
|
| |
|
• Lightweight - only 8 kg
• Powerful – up to 30 A
• Voltage 1 V to 50 V DC
• Ripple free DC-voltage
• Output protection
• Fully automatic operation
|
 |
| |
|
|
|
| |
|
|
|
| |
|
RMO250, Micro OhmMeter |
|
|
|
| |
|
• Max Current - 250A true DC current
• Load interval 200A - 5 min
• Range - 500 mOhm
• Resolution - 0, 1 uOhmμΩ
• Memory - Last 100 measurements
• PC software - Yes
|
 |
| |
|
|
|
|
| |
|
| |
|
|
|
| |
|
CT-8000 S2 , Circuit Breaker Analyzer with 3, 6, or 12 Contact inputs, First Trip Capability, DCR Capability |
|
|
|
| |
|
• Quick-Shot mode for on-line timing; captures first trip time
• Static and dynamic resistance tests
• Prints breaker analysis results in both tabular and graphic formats
• Built-in 4.5-inch wide thermal printer
• Digital travel transducer requires no setup or calibration
• Supports resistance type transducers
• Detects main contact and insertion-resistor contact on the same input channel
• Stores up to 150 test records and 99 test plans
• RS-232C and USB computer interfaces
|
 |
| |
|
|
|
|
|
| |
|
UPS S2 , Universal Power Supply S2 |
|
|
|
| |
|
• Isolated variable 10 – 300 Vdc source
• Isolated variable 10 – 240 Vac source
• 10 ampere continuous current
|
 |
| |
|
|
|
|
| |
|
CBCT , Variable Voltage DC Power Supply for CB Coil Testing |
|
|
|
| |
|
• Isolated variable 10 – 300 Vdc source
• Isolated variable 10 – 240 Vac source
• 10 ampere continuous current
|
 |
| |
|
|
|
|
| |
|
|